V1.1, June 08, 2021
Companion Plus User Manual
© Copyright 2021 Cheelcare
TM
. All rights reserved.
P a g e
|
20
Attaching the Companion Unit to the Companion Adapter
1. Bring the Companion
Adapter’s upper tooth in contact with the upper axle of the Docking
Port.
2. Use both hands to push the handlebar forward and slightly upward from the wheelchair
as shown (the Companion Unit will pivot on the upper axle) until you hear a click. This
indicates that the locking mechanism is activated and that the Companion Adapter and
Companion Unit are connected. The casters of your wheelchair should lift off the ground.
The recommended gap between the casters and the ground is about 5cm/2in.
Upper axle and
tooth in contact
Lower axle
Upper tooth
5cm/2in