Checkpoint Systems Intern. GmbH
Company Confidential
For Internal Use Only
Last Updated:
2/9/2015 11:59 AM
11 of 16
4.5 Reader Specifications
Power Connection
Input Voltage
10,2-13,8 Vdc
Input current
2.7 A at 12 Vdc
Power Consumption
12W ( typical while idle)
33 W ( typical at 0.5 W conducted RF output power and Lamps driving)
The WRTZ-2000 can be powered by suitable AC/DC-Adapter.
Usable Power Supply’s
-
LFZVC60NP12E4, Part Number: 7284242
-
AEB70US12, Part Number: 7421850
WRTZ-2000 does not have power switch. If it is necessary to switch off power, simply unplug 12V DC
connector.
RF Connection
RX/TX Antenna Ports
8 SMA connectors, TX power is halved by internal power splitter
and distributed by internal switches to TX1, TX2, TX3, TX4
Impedance 50 Ohm
Frequency Range
865-868 MHz 902-928 MHz
TX RF Output Power
10mW – 0.5 W conducted (10 - 27 dBm)
RX RF Input Power
100mW max. (20 dBm)
Caution:
This device has been designed to operate with no more than 1 Watt into the antenna and an
antenna gain of no more than 6 dBic. Antenna having a higher gain is strictly prohibited per
regulations of Industry Canada, unless power into the antenna is decreased to compensate
for the increased antenna gain. The required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be
so chosen that the equivalent isotropic radiated power (EIRP) is not more than that required
for successful communication.
The installer of this radio equipment must ensure that the antenna is located or pointed such
that it does not emit an RF field in excess of Health Canada limits for the general
population; consult Safety Code 6, obtainable from Health Canada’s website at
www.hc-sc.gc.ca
4.6 Environment Specifications
Operating temperature
32
°
F to 131
°
F ( 0
°
C to 55
°
C )
Storage temperature
- 40
°
F to 185
°
F ( -40
°
C to 85
°
C )
Relative Humidity
5% to 95 % non-condensing