DT-735 Battery Powered Digital Stroboscope
Operation Manual
Don’t look directly into the light Source. This may result in eye injury.
Don’t use or store in the following environments: Direct sunlight, con-
densation, dust or caustic.
Do not alter, or modify. Such action may cause damage and void war-
ranty.
Operate with 0-35°C (32-95°F), 35-85% RH. Use outside of this range
may alter the unit’s performance.
SPECIFICATIONS
Flashing Range:
60-12,000 fpm (flashes per minute)
Accuracy:
±0.01% F.S.
Resolution:
0.1 from 60-6,000; 1 from 6,001-12,000
Display:
5 digits 0.4” (10 mm) height
Flashtube Power/Life:
Xenon ≤ 45W / 50,000,000
Flash Duration:
10-30 μs automatically adjusts with flash rate
External Trigger Input:
5 V dc ~ 12 Vdc pulse signal input (high
level trigger) from sensor
Sensor Power Supply:
12 V dc up to 50 mA
Lux Rating:
8” (20 cm) Distance = 1550 lx @ 1500 fpm, 2350 lx
@ 6000 fpm with 15.5” (400 mm) irradiation diameter.
20” (50 cm) Distance = 650 lx @ 1500 fpm , 580 lx @ 6000 fpm
with 23.5” (600 mm) irradiation diameter
Battery:
Ni-MH
Battery Life:
1.5 to 2 hours depending on settings
Time to Charge Battery:
5 hours to full charge
Power Requirement:
100-240 VAC 50/60 Hz
Operating temperature:
32° – 104°F (0 – 40°C)
Dimensions:
9.8 x 4.7 x 4.7” (250 x 120 x 120 mm)
Product Weight:
2.75 lb (1.25 kg)
Package Weight:
4.1 lb (1.86 kg)
Warranty:
1 Year
Certification:
CE
Included Accessories:
Upper and Lower Handle, AC converter
charger with cable, 3 pin female M16 threaded connector
The DT-735 is a portable, highly stable, industrial-quality strobo-
scope for non-contact inspection and observation of moving parts
by providing the user the illusion of stopped or slowed down equip-
ment movement.
Constructed with a rugged, metal enclosure, the DT-735’s with-
stand harsh industrial usage. The internal rechargeable battery
and included top and bottom handles aid in portability and usage
flexibility. The control adjustment settings allow the flash rate to be
readily altered by the user to visually inspect rotating or reciprocat-
ing machinery such as gear teeth, rotors, shafts, rewinders, printing
presses, etc. all without stopping production. These features make
the DT-735 ideal for quality inspection and preventive maintenance
of automated motion equipment.
Checkline • 600 Oakland Ave, Cedahurst NY 11516 - USA
www.Checkline.com • [email protected] • 516-295-4300
®
®