Check Point Smart-1 205, Руководство по началу работы

Страница: 24 / 114

Configuring Smart-1 Appliances
24 | Smart-1 205/210 Appliances Getting Started Guide
Available Software Images
Smart-1 Appliances comes with different software images. Select the software image
to install on the appliance.
It takes a few minutes to install the software image. To see the installation progress,
use a serial cable to connect to the Console port.
For more about software images, see the
Smart-1 Appliances home page
http://supportcontent.checkpoint.com/solutions?id=sk98931 .
Initial Configuration
Configure the appliance with the First Time Configuration Wizard.
There are different First Time Configuration Wizard options for the Gaia and the
SecurePlatform operating systems. See the
Installation and Upgrade Guide
related to
the software version.
Note : The Installation and Upgrade Guides are released only for major versions. For
example, for R77.10 version, see the R77 guide.
Creating the Network Object
Configure the Smart-1 Appliances object as a Security Gateway object in the Security
Management Server database.
1.
Open SmartDashboard.
2. Configure a new gateway object for the appliance.
3. Enter the IP address for the appliance.
4. For a centrally managed deployment, create Secure Internal Communication (SIC)
between the Security Gateway and the Security Management Server. Enter the
activation key you used in the First Time Configuration Wizard.
5. Configure the topology.
6. Install the security policy.