Smart-1 Appliances Hardware
Quantum Smart-1 600-M Appliances Getting Started Guide | 14
Storage Devices
n
The supplied Enterprise graded SATA III 3.5" disks are hot swappable.
n
Hot swappable disks are supplied in hot swappable disk carriers that fit in the disk slots.
n
The Smart-1 600-M supports only two disks that must be installed in the two left slots (0 and 1 on the
diagram below).
RAID Levels and Disk Storage
Item
Smart-1 600-M
Default
RAID Level
1
Supported
RAID
Levels
1
Default Storage
2 x 4TB disks
Optional Storage
N/A
Important
- If you configure RAID, these are the only supported settings.
Numbering of the Disk Slots on the Smart-1 600-M Front Panel:
Slot 0
Slot 1
Slot 2
Slot 3
Disk
Disk
Empty
Empty
Note
- Only Slot 0 and Slot 1 are supported in Smart-1 600-M
Do
not
install a disk in Slot 2 or Slot 3.
If you do so, your appliance will show this error:
Disk slot occupation mismatch!!
Only use of slot 0 and 1 is supported.
Disk Carrier LEDs
Each disk carrier has an activity indicator and a status indicator.
These indicators provide information about the current status of the disk.
