Mounting the 16000 Appliances in a Rack
16000 Appliances Getting Started Guide | 29
Mounting the 16000 Appliances in a
Rack
You can install your 16000/16200/16600HS appliance with the Telescopic Rails hardware. See the
Installing the Telescopic Rails
booklet for the procedure.
Appliance Physical Specifications
These are the physical specifications of the Check Point appliance.
Appliance
Regulated
Models
Width
Depth
Height
Maximum
Operating
Temperature
Electrical
Specifications
16600HS
QP-10
17.40
in
(44.2
cm)
24.01
in
(61.0
cm)
1.73 in (4.4
cm) (1U)
32°F - 104°F
0°C - 40°C
100V(10A)-240V
(5A)
47-63HZ
16000
Base/Plus
QL-15
17.40
in
(44.2
cm)
24.01
in
(61.0
cm)
3.46 in (8.8
cm) (2U)
32°F - 104°F
0°C - 40°C
100V(13.8A)-240V
(8.5A)
47-63HZ
16000
Turbo
16200
QL-20
17.40
in
(44.2
cm)
24.01
in
(61.0
cm)
3.46 in (8.8
cm) (2U)
32°F - 104°F
0°C - 40°C
100V(13.8A)-240V
(8.5A)
47-63HZ
Appliance Air Vents
Make sure that the appliance air vents have sufficient airflow from front to rear when the appliance is
mounted in a rack.
Important
- If the appliance vents are blocked, the appliance can become too hot and it
can be damaged.
The appliance and rack rails have been tested in extreme conditions and do not block air flow to the
appliance. These appliances are specifically designed to install with these rails.