Checchi & Magli BABY TRIUM, Руководство по эксплуатации и обслуживанию

Страница: 100 / 256

UN41-0727EO
B
A
C
D
UN41-0728EO
A
B
C
D
E
F
English language Use and maintenance
46
INFORMATION CONCERNING REPLACEMENTS
8
Replacing the flexible plate
For this operation, proceed as outlined below.
1) Loosen the wing nut (
A
).
2) Turn the lock lever ( B ).
3) Push the share forwards and turn it so it is facing
downwards.
4) Release the spring (
C
).
5) Unscrew the screws ( D ).
6) Remove the flexible plate (
E
).
7) Fit the new flexible plate in position.
8) Tighten the screws (
D
).
9) Attach the spring ( C ).
10) Make sure the flexible plate is centred (see "Adjust-
ing the flexible plate centring").
11) Check the position of the flexible plate with respect
to the share (see "Adjusting the flexible plate posi-
tion").
12) Refit the share in the work position.
13) Check that the Plant Control device (
F ) is inside the
share.
14) Make sure that the share is secured in place with the
lock lever (
B
).
15) Tighten the wing bolt ( A ).
Replacing the packing wheel scraper
For this operation, proceed as outlined below.
1) Remove the lock pin (
A
).
2) Remove the circlip (
B
).
3) Remove the washer ( C ).
4) Unscrew the screw ( D ).
5) Slide the scraper off the shaft.
6) Fit the new scraper.
7) Tighten the screw (
D ).
8) Fit the washer ( C ) followed by the circlip ( B ).
9) Insert the lock pin (
A
).
10) Repeat the same procedure for the other scraper.