Checchi & Magli BABY COMPACT, Руководство по эксплуатации и обслуживанию

Страница: 84 / 224

English language Use and maintenance
36
MAINTENANCE INFORMATION
7
Troubleshooting
The following list contains a number of common problems that may arise during work, together with the ways to
solve them.
Problem Likely cause Solution
The seedling planted is too close to
the surface or too deep
Incorrect planting depth
Make the relative adjustment (see
“Adjusting the planting depth”)
The dispenser is not synchronised
with the ejector Adjust the timing (see “Adjusting the
dispencing/ejection timing”)
The soil has not been properly
compacted on top of the seedlings The packing wheels are not
properly adjusted
Adjust the packing wheels (see
“Adjusting the distance between the
packing wheels and the ploughshare”)
Adjust the planting unit load (see
“Adjusting the packing efficiency”)
The planted seedling is tilted or
lying overturned on the ground
The dispenser is not synchronised
with the ejector Adjust the timing (see “Adjusting the
dispencing/ejection timing”)
The Plant Control device is not in
the right position Adjust the Plant Control device (see
“Adjusting the Plant Control”)
The packing wheels are not set
properly Adjust the packing wheels
Nuts and bolts tightening torques chart
Nuts and bolts tightening torques
Thread
diameter
Thread
pitch (mm)
Resistance class
8.8 (Nm)
Resistance class
10.9 (Nm)
Resistance class
12.9 (Nm)
M 4 0,7 2.7 3.8 4.6
M 5 0,8 5.5 8.0 9.5
M 6 1 9.5 13.0 16.0
M 8 1,25 23.0 32.0 39.0
M 10 1,5 46.0 64.0 77.0
M 12 1,75 80.0 110.0 135.0
M 14 2 125.0 180.0 215.0
M 16 2 195.0 275.0 330.0
M 18 2,5 270.0 390.0 455.0
M 20 2,5 385.0 540.0 650.0
M 22 2,5 510.0 720.0 870.0
M 24 3 660.0 930.0 1100.0
M 27 3 980.0 1400.0 1650.0