CHD 3050U
User Manual
© Computer Hardware Design
23
4.3 PRINTER WARNINGS
Status
Display
Explanation
Printer error
E20
PRINTER ERROR
General printer error. Turn off ECR, wait for
30 sec. and turn it back on to continue work.
Printer error
E20
PR. VOLTAGE ERR.
Printer voltage outside the appropriate
limits. Turn ECR off, turn it back on and try
to continue work.
Receipt paper end
E21
RECEIPT PAPER END
Open printer compartment cover, release
the receipt printer head and replace receipt
paper. Press
[CLEAR],
when paper is
installed.
Receipt printer open
E23
RECEIPT PR. OPEN
Receipt printer head released. Open printer
compartment cover and check Receipt
printer upper frame to be set properly
–
lower position.
Abnormal receipt printer
head temperature
E25
R PRINTER TEMP.
This is a serious ECR malfunction. Stop
ECR operation for a minute, then continue.
If the error message persists, contact an
authorised service.
No connection to
Receipt printer
E27
R PRINTER DISCON
This is a serious ECR malfunction. Printer
has been disconnected. Contact an
authorised service.
4.4 SALE FINALIZATION WARNINGS
Status
Display
Explanation
Subtotal compulsion
E31
SUBTOTAL REQUIRED
To continue tender operations, press key
[SUBTOTAL].
No payment media
E32
TENDER NOT FOUND
Relevant entry missing in the media table.
The necessary programming configurations
have to be carried out.
No currency
E33
NO CURRENCY
Relevant entry missing in the currency table.
The necessary programming configurations
have to be carried out.
Over tender disable
error
E34
OVER TEND
Amount tendered must be equal or less than
sale subtotal. Press
[CLEAR]
to proceed
and enter smaller amount.
Under tender disable
error
E35
UNDER TEND
Amount tendered must be equal or higher
than sale subtotal. Press
[CLEAR]
to
proceed and enter larger amount.