Getting Started with i90
CHCNAV i90 GNSS USER GUIDE
| 2019-9
P a g e | 18
Auxiliary H.I. Tool
Transport Hard Case
2.6 Connecting to an Office Computer
The receiver can be connected to an office computer for serial data transfer or settings via a
HCE320 USB Type-C. Before you connect to the office computer, ensure that the receiver is
powered on by internal battery or external power.
The following figure shows how to connect to the computer for serial data transfer or settings:
2.7 Connecting to a Controller
2.7.1 Connecting via Wi-Fi with LandStar 7 Software
Turn on the controller → run LandStar 7 → go to
Config
main menu → tap
Connect
.
In the
Connect
screen, select
CHC
for the
Manufacture
field,
i90
for
Device Type
field,
WIFI
for
Connection Type
field.
HCE320 USB Type-C
