12
iGage
LT500T User Manual
6.
From the Wi-Fi dialog, click on ‘Menu’:
7.
A menu will be shown:
Then click on ‘Advanced’
8.
On the ‘Advanced Settings’ dialog
Uncheck ‘Turn on available network
notification’, then click on OK.
This setting will prevent the data collector
from asking you to connect to every Wi-Fi
network that you pass by.
Connecting the LT500T to your Computer with a USB Cable
1.
It is best if your computer is connected to the internet prior to making the USB connection. If
updated components are available they will automatically be found and downloaded during
the bonding process.
2.
Turn on your LT500T.
3.
Insert the USB cable small end into the LT500T:
and the large end into an open USB port on your PC.
4.
If your computer operating system is Windows XP you may need to manually install
‘ActiveSync’. If your computer is Windows 7, 8 or 10 then ‘Windows Mobile Device Center’ is
already installed on your computer. If this is the first mobile device that you have connected
to your computer, it may be installed, but not fully activated.
5.
The first time you connect the device, it may take 30 minutes for your computer to install and
activate all of the required components. Remember that if your computer operating system is
Windows 7, 8 or 10 then all required components already are loaded and available on your
computer. Be patient.