Chauvin Arnoux pel 102, Руководство пользователя

Страница: 7 / 86

7
2. PRODUCT FEATURES
2.1. DESCRIPTION
PEL: P ower & E nergy L ogger
The PEL102, PEL103 and PEL are simple-to-use single-, dual-, and three-phase (Y,
∆
) Power & Energy Loggers.
The PEL offers all necessary functions for Power/Energy data logging for most 50 Hz, 60 Hz, 400 Hz and DC distribution systems
worldwide, with many connection possibilities. The PEL is designed to work in 1000 V CAT III and 600 V CAT IV environments.
The PEL is compact and can be incorporated in many distribution panels.
The PEL provides the following measurements and calculations:
„
Direct measurements of voltages up to 1000 V CAT III and 600 V CAT IV
„
Direct measurements of current from 50 mA up to 10 000 A with MA194 external current sensors
„
Power measurements: active (W), reactive (var) and apparent (VA)
„
Energy measurements: active (source and load (Wh)), reactive 4 quadrants (varh) and apparent (VAh)
„
Power Factor (PF), cos
ϕ
, and tan
Φ
„
Crest Factor
„
Total Harmonic Distortion (THD) for voltages and currents
„
Harmonics from the fundamental signal up to the 50th order for 50/60 Hz voltages and currents
„
Frequency measurements
„
RMS and DC measurements @ 128 samples/cycle – all phases simultaneously
„
Bright white triple LCD display with white backlighting for the PEL 103 and PEL 104 (3 phases shown simultaneously)
„
Storage of measured and calculated values on an SD-Card or SDHC-Card
„
Automatic recognition of the different types of current sensors
„
Configuration of current and voltage ratios with external sensors
„
Supports 17 types of connections or electrical distribution systems
„
USB, LAN, and Bluetooth communication
„
PEL Transfer software for data recovery, configuration and real-time communication with a PC
„
Android application to communicate in real time and configure the PEL from a smartphone or a tablet.
For PEL 104 only:
„
Wi-Fi and 3G-UMTS/GPRS communication.
„
Communication with up to four data loggers - L452 Data Loggers (optional), to record voltages, currents, and events).
„
Measurements of the fundamental active power.
„
32 programmable alarms on the measurements or on the analog inputs with the L452 Data Logger (optional), which communicates
via Bluetooth.
„
IRD server to communicate using private IP addresses.
„
Sending of periodic reports by email.