Chauvin Arnoux pel 102 Скачать руководство пользователя

Страница: 52 / 86

5. SOFTWARE AND APPLICATION

5.1. PEL TRANSFER SOFTWARE

5.1.1. FUNCTIONS

PEL transfer software is used to:

Connect the instrument to the PC by Wi-Fi (PEL104), Bluetooth, USB, or Ethernet or 3G-UMTS/GPRS (PEL104).

Assign a name to the instrument, choose the brightness and contrast of the display unit, disable or enable the

Selection

key of the instrument, set the date and time, format the SD card, etc.

Configure communication between the instrument and the PC.

Configure the measurement: choose the distribution network, the transformation ratio, the frequency, the transformation ratios

of the current sensors.

Configure the records: choose their names, their duration, their starting and ending dates, the aggregation period, whether or

not “1s” values and harmonics are recorded.

Manage energy meters, the operating time of the instrument, the time voltages are present on the measurement inputs, the

time currents are present on the measurement inputs, etc.

Connect L452 Data Loggers to the PEL104.

Manage alarms on the measurements of the PEL104 or of the L452 Data Loggers connected.

Manage the sending of periodic reports by email (PEL104).

PEL Transfer can also be used to open records, upload them to the PC, export them to a spreadsheet, view the corresponding

curves, and create and print reports.

It is also used to update the internal software of the instrument when a new update is available.

5.2. INSTALLING PEL TRANSFER

Do not connect the instrument to the PC until the software and the driver have been installed.

Minimum computer configuration required:

Windows

7 (32/64 bits) or Windows

2GB to 4GB of RAM

10GB of disc space

1 CD-ROM drive

Windows

is a registered trade mark of Microsoft

Download the latest version of PEL Transfer from our web site:

www.chauvin-arnoux.com

Run

setup.exe

. Then follow the installation instructions.

You must have administrator privileges on your PC to install the PEL Transfer software.

Содержание pel 102























































































Результаты поиска

Содержание pel 102

Отзывы:

Похожие инструкции для pel 102

Бренды по названию

Популярные бренды

Chauvin Arnoux pel 102, Руководство пользователя

Результаты поиска

Содержание pel 102

Отзывы:

Похожие инструкции для pel 102

Бренды по названию

Популярные бренды