Chauvin Arnoux pel 102 Скачать руководство пользователя страница 15

Страница: 15 / 86

2.12. LED

LED & Colour Description

REC

Green LED

(PEL102

PEL103)

Recording Status

LED blinks once per second every 5 s: Logger in standby (not recording)

LED blinks twice per second every 5 s: Logger in recording mode

REC

Red LED

(PEL104)

Recording Status

Indicator off: no recording programmed or in progress

Indicator blinking: recording programmed

Indicator on: recording in progress

Blue LED

Bluetooth

LED OFF: Bluetooth OFF (disabled)

LED ON: Bluetooth ON (enabled - not transmitting)

LED blinks: Bluetooth ON (enabled - transmitting)

Green LED

(PEL104)

Wi-Fi

LED off: Wi-Fi link off (disabled)

LED on: Wi-Fi link enabled but not transmitting

LED blinking: Wi-Fi link enabled and transmitting

Green LED

(PEL104)

3G-UMTS/GPRS

LED off: 3G-UMTS/GPRS link off (disabled)

LED on: 3G-UMTS/GPRS link enabled but not transmitting

LED blinking: 3G-UMTS/GPRS link enabled and transmitting

Red LED

Phase order

OFF: the order of phase rotation is correct.

LED blinking: the order of phase rotation is incorrect. In this case, there are three possibilities:

the phase difference between the phase currents is 30° greater than normal (120° in three-phase

and 180° in two-phase).

the phase difference between the phase voltages is 10° greater than normal.

the phase difference between the currents and voltages of each phase is 60° greater than 0° (load)

or 180° (source).

Red LED

Overload

OFF: No overload on the inputs

LED blinking: At least one input is overloaded, indicates that a lead is either misconnected or missing

Red/green LED

SD-Card

Green LED ON: SD-Card is OK

LED blinking red: the SD card is being initialized

LED blinking alternately red and green: the SD card is full

LED blinking light green: the SD card will be full before the end of the current recording session

Red LED ON: SD-Card is missing or locked

Orange/red LED

Battery

LED OFF: Battery full

Orange LED ON: Battery is charging

Orange LED blinking: Battery is recovering from a full discharge

Red LED blinking: Low battery (and no power supply)

Green LED

in ON/OFF key

ON/OFF

LED ON: External power supply present

LED OFF: No external power supply

Green LED

embedded in

the connector

USB

LED OFF: No activity

LED blinks: Activity

Содержание pel 102























































































Результаты поиска

Содержание pel 102

Отзывы:

Бренды по названию

Популярные бренды

Chauvin Arnoux pel 102, Руководство пользователя

Результаты поиска

Содержание pel 102

Отзывы:

Бренды по названию

Популярные бренды