English
36 C.A1886
–C.A1888
9. CONNECTIONS AND DOWNLOADING
9.1 CONNECTION TO A MONITOR
It is possible to use a video screen connected by a video cable (provided) to
display and analyze the images you have taken.
1. Switch the I.R camera off.
2. Connect the video cable to the video output jack on the bottom of the
device.
3. Connect the other end of the video cable to the video input jack of the
screen.
4. Switch on the screen and the I.R. camera.
9.2 USING THE BLUETOOTH HEADSET (OPTION)
The device has a module that lets you use the Bluetooth headset (optional) to
record voice remarks. To install the headset the first time, proceed as follows:
1. Switch off the camera and the Bluetooth headset.
2. Start by powering up the Bluetooth headset. Press the On/Off button
and hold it down for approximately 10 seconds. You will then see the
power indicator start to flash, first red, then blue. The headset is in the
coupling mode at the end of 120 seconds.
