Chauvin Arnoux P01651260, Руководство пользователя

Страница: 27 / 46

English
C.A1886 – C.A1888 27

To change the type of isotherm, its width, its alert, and its colour, refer to
the previous section.
6.3.3 Profile analysis
5. Press the MENU / VALIDATION key.
6. Press the UP or DOWN arrow to select [Analysis] menu.
7. Press the UP or DOWN arrow to select [Profile], then press the
MENU/VALIDATION key
Temperature
distribution
8. Press the UP or DOWN key to move the profile.
6.3.4 Area analysis
1. Press the MENU / VALIDATION key.
2. Press the UP or DOWN arrow to select [Analysis] menu.
Analysis ►
File ►
IR / Visible
Manual Adj.
Object Param.
System Setup ►
3. Press the UP or DOWN arrow to select [Area], then press the
MENU/VALIDATION key.
Spot1
Spot2
Spot3
< Maximum >
Isotherm
Profile
Area
< Removeall >