English
C.A1886 – C.A1888
13
3.5 SETTING THE DATE AND TIME
You must set the date and time when you switch the camera on for the first time.
1. Check that the camera is in Null mode.
2. Press the MENU key and select the [System Setup] menu.
Analysis
►
File
►
IR / Visible
Manual Adj.
Object Param.
System Setup
►
Analysis setup
Local setup
Date & Time
Camera setup
System info
3. Select the [Date & Time] sub-menu.
4. Set the date and time
Press the UP or DOWN arrow to select the field to be modified.
Press the LEFT or RIGHT arrow to define the values.
5. After completing the parameterizing, press the MENU/VALIDATION key
to close the window and save the modifications, or the C key to exit
without saving.
3.6 LOCAL SETTINGS
This menu is used to display the local parameters of your geographical zone.
1. Check that the camera is in Null mode.
2. Press the MENU/VALIDATION key, then the UP or DOWN arrow to select
the [System Setup] menu.
Analysis
►
File
►
IR / Visible
Manual Adj.
Object Param.
System Setup
►
Analysis setup
Local setup
Date & Time
Camera setup
System info
