English
10 C.A1886
–C.A1888
3.2 INSTALLING THE BATTERY
The battery must be fully charged before it is used for the first time (the
battery reaches its full capacity only after 5 complete
charging/discharging cycles).
1.
Switch off the camera. Push the clip of the battery compartment cover
toward the front, then lift the cover.
2.
Install the battery in its compartment, then push it in until it locks.
3. Close the battery compartment cover.
Withdraw the battery when you expect to leave the camera unused for an
extended period (in order to avoid discharging too deeply): even when the camera
is off, there is some consumption (C.A 1886: 8 mA; C.A 1888: 6,6 mA).
The Mini SD card must be formatted to FAT16 or FAT32, since otherwise the
camera may fail to recognize it.
