Chauvin Arnoux Metrix MTX 3292B, Руководство пользователя

Страница: 8 / 55

8
3.1.2. Keypad
The keypad has the following function keys:
The keys are taken into account and applied when pressed. If the key press is validated, the instrument beeps.
The active keys on a long press are identified by "…":
Meas…, Mem… , Setup…
Short press Long press
Hold of the display.
Selection of RUN, HOLD or Auto HOLD.
Measurement menu with 3 levels. Reset for SURV/PEAK/REL and CNT
Start/Stop storage.
Selection of the files and configuration of
the records.
Choice of automatic or manual range
change.
3.1.3. Display
3.1.4.
Principal quantities measured

VLowZ AC voltage measurement at low impedance (VLowZ)

VAC AC voltage measurement

VAC/DC DC or AC+DC voltage measurement at high impedance (V)

A Current measurement A (AC, DC, AC+DC)

Hz Frequency measurement

Ω
Resistance measurement

C Capacitance measurement

T° Temperature measurement

% Measurement of relative value or duty cycle

♪
Continuity, diode test
3.1.5. Secondary quantities measured
For the secondary quantities measured, refer to table in the appendix.
Display of the wiring diagram of the
terminal block as a function of the
measurement
Digital display:
-
of the quantity measured, - of the
value measured,
-
of the type of measurement, etc.
Secondary display:
- in graphic form
- or in the form of 3 display units
Scrolling information
Properties of the F1, F2, F3, and F4 keys