background image

5

7. 

3 pin XLR connectors are more popular than 5 pin XLR.
3 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+)
5 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+)

 2. Technical Specification

 Power supply

- AC 120V~60Hz
- AC 230/240/250V~50/60Hz

 Lamp

- Discharge MSD 250W or NSD 250W GY 9.5

 Optical system

- Standard 13° focused beam angle.
- Focus can be adjusted by manual.

 Shutter

- Blackout, dimmer and strobe speed variable(1~12 flashes per second).

 Gobo wheel

- Independent gobo wheel with 7 gobos plus open.

- Gobo wheel rotates with variable speed and rainbow effect.

 

Gobo rotation

- 7 metal gobos, rotating in both directions at different speeds.
- Outside diameter 27.8 mm, image diameter 18 mm.

 Color wheel

- Independent color wheel with 9 dichroic mirrors plus white.

- Color wheel rotates with variable speed and rainbow effect.

 Movement

- Pan : 180° in 0.5 second.
- Tilt : 70° in 0.3 second.

 DMX Channels

- Standard DMX512 signal addressing and can be controlled by any universal DMX
controller.

 Channel 1 = Shutter
 Channel 2 = Gobos
 Channel 3 = Gobo rotation
 Channel 4 = Colors
 Channel 5 = Pan motion
 Channel 6 = Tilt motion

 Dimension : 

560mm x 250mm x 205 mm (without bracket)

 Weight : 

17 kg (AC 120V) / 13.5 kg (AC 230~250V)

 Luminous intensity:

 2.1 Inserting/Exchanging rotating gobos

DANGER!

Install the gobos with the device switched off only.

Unplug from mains before!

Open the cover by loosening the fastening screw at the sides of the cover.
If you wish to use other forms and patterns as the standard-gobos, or if the gobos
are to be exchanged, remove the fixation ring with an appropriate tool. Remove the
gobo and insert the new gobo. Press the fixation-ring together and insert it in the
front of the gobo.

CAUTION!

Never unscrew the screws of the rotating gobo as the ball

bearing will otherwise be opened!

 5.4. DMX512 Configuration

DMX512 configuration

Channel 1

Channel 2

Channel 3

Channel 4

Channel 5

Channel 6

Shutter

Gobo

Gobo Rotation

Full Color

Split Color

Pan

Tilt

Open

248-255

Fastest speed

255

Stopped
246-255

Fastest speed

255

Содержание TRACKSCAN 250R










Отзывы: