Chauvet GEYSER P4, Руководство пользователя, Страница: 14 / 19

Page 14 of 19 Geyser P4. User Manual Rev. 2
Configuration
(Standalone)
To control the product without a DMX controller;
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Set it to be triggered for either up-close or with the wireless remote.
Programmable
Color Selection
<MANUAL>
To select the preset color program when using the <MANUAL> button on the product,
follow the instructions below:
1. Press <MENU> repeatedly until nCoL shows on the display.
2. Press <ENTER> .
3. Use <UP> or <DOWN> to select either P 0 (for blackout) or
P 1–P32 (to choose one of 32 preset colors).
4. Press <ENTER> .
5. Use <UP> or <DOWN> to scroll through P 1–P32 .
6. To select that program color, press <ENTER> .
Programmable
Color Selection
(Wireless Remote
Control)
To select the preset color program using the wireless remote control, follow the
instructions below:
1. Press <MENU> repeatedly until CH-1–CH-4 shows on the display. Select CH-1 ,
CH-2 , CH-3 , or CH-4 to choose that color program.
Note: The color program numbers correspond with the numbered buttons on the
wireless transmitter.
2. Press <ENTER> .
3. Use <UP> or <DOWN> to select P1 1 – P1 32 (to choose one of 32 preset color
programs).
4. Press <ENTER> .
5. Repeat steps 1–4 to configure the other buttons for the remote.
Wireless Remote
Control
To trigger fog output and activate the color program using the wireless remote control, do
the following:
1. Plug the wireless receiver into the Remote Control Receiver port on the side of the
Geyser P4
2. On the wireless transmitter, press the button assigned to the color program ( 1 – 4) .
The Geyser P4 emits fog and activates the color program for as long as you hold
down the button.
LED
indicator
(ready)
Dipswitches
LED indicator
(heating)
Wireless
Receiver
Wireless
Transmitter
Fog
Triggers