DMX-RT User Manual Rev. 3
S
ETUP
3. S
ETUP
AC Power
The DMX-RT has an external auto-ranging power supply that works with an input voltage range of 100 to
240 VAC, 50/60 Hz. It runs on 12 VDC, 1A. To determine the product’s power requirements (circuit
breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back
panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s
average current draw under normal conditions.
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the
.
Orientation
The DMX-RT may be mounted in any position; however, make sure adequate ventilation is provided
around the product.
Rigging
•
Before deciding on a location for the product, always make sure there is easy access to the product
for maintenance and programming purposes.
•
Make sure that the structure onto which you are mounting the product can support the product’s
weight. See the
•
When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
•
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
•
When power linking multiple products, mount the products close enough for power linking cables to
reach.
•
The bracket adjustment knobs allow for directional adjustment when aiming the product to the
desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the
knobs.
Mounting Diagram
•
Always connect the product to a protected circuit (circuit breaker or fuse).
Make sure the product has an appropriate electrical ground to avoid the risk of
electrocution or fire.
•
To eliminate unnecessary wear and improve its lifespan, during periods of non-
use completely disconnect the product from power via breaker or by
unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
!
Overhead Mounting
Surface Mounting
Mounting Points
Содержание DMX-RT
Страница 1: ...DMX RT User Manual...