O
PERATION
DMX-RT User Manual Rev. 3
4. O
PERATION
Control Panel Operation
To access the control panel functions, use the four buttons located underneath the display. Please refer to
the
to see the button locations on the control panel.
Menu Map
Configuration
Trigger Set-up
Set the DMX-RT to
nC
if the circuit is “on” (closed) during normal operation. The trigger will be cued when
the circuit is turned “off”.
1.
Go to
SEtU > tt
.
2.
Select
nC
.
Set the DMX-RT to
no
if the circuit is “off” (opened) during normal operation. The trigger will be cued when
the circuit is turned “on”.
1.
Go to
SEtU > tt
.
2.
Select
no
.
B
UTTON
F
UNCTION
<MENU>
Press to find an operation mode or to back out of the current menu option
<UP>
Press to scroll up the list of options or to find a higher value
<DOWN>
Press to scroll down the list of options or to find a lower value
<ENTER>
Press to activate a menu option or a selected value
M
AIN
L
EVEL
P
ROGRAMMING
L
EVELS
D
ESCRIPTION
----
Main Level Start
SEtU
tt
nC
Normal= Closed. Product is set to trigger when
circuit opens
no
Normal= Opened. Product is set to trigger when
circuit closes
rt
Shot
Plays the selected show file one time only.
LooP
Plays the selected show file continuously until
trigger is released
FILE
F000-999
Selects the show file to play
dt
00-60
Sets delay time in seconds. until the sequence can
be triggered again
rb
nAnL
Sets the trigger mode to press <
Enter
> to start the
recording.
non
Sets the trigger mode to having a DMX value of 001
or higher to start recording.
rE
nAnL
Press <
Enter
> to stop the recording.
non
Sets the trigger mode to having a DMX value of 000
to stop the recording.
rECo
F000-999
StAr
mm.ss
Select to put product in record mode
rUn
F000-999
StAr
mm.ss
Select a program to test or preview. Press <
Enter
>
to begin the sequence and press <
Menu
> to stop.
vEr
bxx
Shows the software (bootloader) and firmeware
(application) versions
Axx
Содержание DMX-RT
Страница 1: ...DMX RT User Manual...