
Page 15 of 323
Operation
Maverick MK3 Wash User Manual Rev. 7
Single Control
In Single Control mode, the Maverick MK3 Wash is controlled by a single protocol input. Choose from
DMX, Art-Net™, sACN, or WDMX. In this mode, the four personalities available are:
Basic
(21 channels),
Standard
(129 channels),
Advanced
(243 channels), and
Tour
(297 channels).
Single control protocol
To select the Single Control protocol, follow the instructions below:
1. Press
<MENU>
repeatedly until the
shows on the display. Press
<ENTER>
.
2. Use
<UP>
,
<DOWN>
,
<LEFT>
, or
<RIGHT>
to select
Control Settings
, or touch the display
where it says
Control Settings
.
3. If using the buttons instead of the touchscreen, press
<ENTER>
.
4. Use
<UP>
or
<DOWN>
to select Single Control, or touch the display where it says
Single
Control
.
5. If using the buttons instead of the touchscreen, press
<ENTER>
.
6. Use
<UP>
or
<DOWN>
to select from
DMX
,
ArtNet
,
sACN
, or
WDMX
, or touch the display where
it says the desired protocol option.
7. If using the buttons instead of the touchscreen, press
<ENTER>
.
Single control personality
To select the Single Control personality, set the
1. Use
<UP>
or
<DOWN>
to select
Personality
, or touch the display where it says
Personality
.
2. If using the buttons instead of the touchscreen, press
<ENTER>
.
3. Use
<UP>
,
<DOWN>
,
<LEFT>
, or
<RIGHT>
to select from
Basic
(21-channel),
Standard
(129-channel),
Advanced
(243-channel), or
Tour
(297-channel), or touch the display where it
says the desired personality.
4. If using the buttons instead of the touchscreen, press
<ENTER>.
Single control start address
To set the starting address of the Single Control mode, set the
, then follow the instructions below:
1. Use
<UP>
or
<DOWN>
to select
Start Address
, or touch the display where it says
Start Address
.
2. If using the buttons instead of the touchscreen, press
<ENTER>
.
3. Enter the starting address (
1–512
) with one of the following methods:
•
Type the address number using the number pad that shows on the touchscreen display.
•
Using the buttons (or the button icons on the sides of the display):
a.
Use
<LEFT>
or
<RIGHT>
to select the digit to be altered.
b.
Use
<UP>
or
<DOWN>
to increase or decrease the number value of that digit.
c.
Repeat until the address is set as desired.
4. Press
<ENTER>
.
Single control universe
To set the Universe address of the Single Control mode when using Art-Net™ or sACN, set the
to
ArtNet
or
sACN
, then do the following:
1. Use
<UP>
or
<DOWN>
to select
Universe
, or touch the display where it says
Universe
.
2. If using the buttons instead of the touchscreen, press
<ENTER>
.
3. Enter the universe address (
0–255
) with one of the following methods:
•
Type the address number using the number pad that shows on the touchscreen display.
•
Using the buttons (or the button icons on the sides of the display):
a.
Use
<LEFT>
or
<RIGHT>
to select the digit to be altered.
b.
Use
<UP>
or
<DOWN>
to increase or decrease the number value of that digit.
c.
Repeat until the address is set as desired.
4. Press
<ENTER>.
For WDMX control, ensure the antenna is raised, and there are no obstructions
between the controller and the product. See
for troubleshooting
information.