COLORado™ 2-Quad Zoom IP QRG
EN
3
DMX Linking
The COLORado™ 2-Quad Zoom IP will work with a DMX controller using a
regular DMX serial connection. A DMX Primer is available from
DMX Connection
The COLORado™ 2-Quad Zoom IP uses a regular DMX data connection for
its DMX personalities:
TOUR
,
TR16
,
STD.Y
,
ARC.1
,
AR1.D
,
ARC.2
,
AR2.D
,
AR2.S
,
AR2.Z
, and
HSV
. See the User Manual to connect and
configure for DMX operation.
Note: For optimum control of the 16-bit dimming channels in the TR16
and STD.Y personalities, be sure that both dimming curves in SET > DIM
and SET > CURV are set to OFF.
Master/Slave
Connection
The COLORado™ 2-Quad Zoom IP uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
Mounting
Product
Mounting
Diagram
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the
currently selected value into the selected function
<UP>
Navigates upwards through the menu list or increases
the numeric value when in a function
<DOWN>
Navigates downwards through the menu list or
decreases the numeric value when in a function
Passcode
After being prompted, enter the following passcode by pressing:
•
<
UP
>, <
DOWN
>, <
UP
>, <
DOWN
>, <
ENTER
>
This passcode cannot be changed and must be used whenever prompted.
Secure the safety cable using
the safety cable loop on the
back of the product.
Overhead Mounting
Floor Mounting
Mounting Clamp
(such as CLP-15
from CHAUVET®)
Safety Cable
(such as CH-05
from CHAUVET®)