EN
4
Intimidator Beam 360X QRG Rev. 1
QUICK REFERENCE GUIDE
DMX Linking
The Intimidator Beam 360X can work with a DMX controller. Instructions for connecting and configuring this product for
DMX operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from
.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is
499
.
Master/Slave Connection
The Intimidator Beam 360X uses the DMX data connection for its Master/Slave mode. Information about configuring the
Intimidator Beam 360X for Master/Slave operation is in the User Manual, which is available from the Chauvet website.
RF Remote
The Intimidator Beam 360X can be operated with the CHAUVET RFC or RFC-XL remotes. For more information about
the RF Remote, download instructions for the Intimidator Beam 360X User Manual from
.
Gobos
Sys Info
Ver:
V_
Displays the firmware version
Running Mode
_ _ _ _ _ _
_
Displays the current running mode
DMX Address
_ _ _
Displays the current DMX address
Temperature
_ _ _
Displays the current product temperature
Main Level
Programming Levels
Description