background image

Triton® Traction

52

troubleshooting

 

problem 

     possible 

remedy

 

Unable to properly read Patient Data Card. 

 

• Properly insert a Patient Data Card. 

   

   

 

 

 

 

• Use a known good Patient Data Card. 

   

   

 

 

 

 

• If problem persists, contact dealer or DJO, LLC for service.

 

Attempted to use an Invalid Patient Data Card. 

 

• Properly insert a Patient Data Card. 

   

   

 

 

 

 

• Use a known good Patient Data Card. 

   

   

 

 

 

 

• If problem persists, contact dealer or DJO, LLC for service.

 

No Session Data is available on the inserted Patient   

• Save session data to Patient Data Card.

 

 

Data 

Card. 

 

     

• Use a known good Patient Data Card. 

   

   

 

 

 

 

• If problem persists, contact dealer or DJO, LLC for service.

 

Patient Data Card is full. 

 

 

 

• Purchase additional Patient Data Cards from an authorized DJO, LLC dealer. 

 

 

 

      

 

sEMG Traction button is grayed out. 

 

 

• An sEMG Module is required to initiate EMG Traction 

   

   

 

 

 

 

• Make sure sEMG Module is properly inserted into the Triton traction unit. If  

   

   

 

 

 

 

  problem persists, contact dealer or DJO, LLC for service.  

Содержание Triton 4749





























































Отзывы: