Chattanooga Triton 4749 Скачать руководство пользователя страница 26

Страница: 26 / 60

Triton® Traction

operAtion

pAtient prepArAtion

Traction therapy may be given by or on order of a qualified licensed

practitioner. The person administering the treatment must be familiar

with the principles of traction therapy and be able to choose the correct

mode of traction, traction forces, and treatment times. Any settings

or types of traction mentioned in this manual are for illustrative and

expository purposes only. Each patient should be individually assessed

by a licensed practitioner to determine the appropriateness of the

parameter settings prior to use.

To prepare the patient for traction therapy, do the following:

• A licensed practitioner experienced with traction therapy must be

familiar with all instructions contained in this manual before traction

therapy. Do not attempt to become familiar with the Triton traction

unit while administering traction therapy on a patient.

NOTE:

The Patient Interrupt Switch must be plugged in for the unit to

operate. If the Patient Interrupt Switch is not inserted into the

traction unit, a continuous audible tone will sound and a

message will display saying,

"Patient Switch is not plugged into

the unit. Correct the problem."

Touch the Screen anywhere to

continue.
2. Turn the unit on from the Power On/Off Switch, located on the back of

the unit. Wait about five seconds for the unit to go through

initialization before attempting any further patient preparation

procedures.

3. Test the Patient Interrupt Switch by pressing the red button. A warning

message will be displayed saying

The Patient Interrupt Switch has

been pressed

Touch the screen to continue.

4. Give the Patient Interrupt Switch to the patient, instructing that

pressing the red button will stop the treatment.

• Always test the Patient Interrupt Switch cable before each use for

proper operation.

• The Patient Interrupt Switch must be in the patient’s grasp throughout

the traction therapy.

1. Attach the Patient Interrupt Switch by

inserting the male end of the cable

into the Patient Interrupt Switch

Receptacle located on the front of the

unit.

Содержание Triton 4749





























































Результаты поиска

Содержание Triton 4749

Отзывы:

Похожие инструкции для Triton 4749

Бренды по названию

Популярные бренды

Chattanooga Triton 4749, Руководство пользователя

Результаты поиска

Содержание Triton 4749

Отзывы:

Похожие инструкции для Triton 4749

Бренды по названию

Популярные бренды