DEVICE ISSUES
34
MODULE LED INDICATION
Off – No LED activity
When the module is off, there is no LED activity.
Green - Counting
When the remote is switched on and the module is paired, its LED is green. In this state the module has a counting system.
The counting principle is simple: every 3 seconds, each module starts counting. For the module with channel 1, it will blink
once. For module with channel 2, it will blink 2 times, etc.
Blinks green and red – Not synchronized
The indication of a green and red blinking LED means that the module is out of range or not recognized by the remote
control.
Problem
Possible cause
Solution
The LED blinks red
and green
The module is out of range
or is not recognized by the
remote control.
•
Make sure the remote control is switched on.
•
Check whether the module and the remote are less than 2
meters apart.
•
Try to restart the module
•
Place the module and the remote control on the same
docking station (plugged to the mains power) in order to
pair them.
