15 700 02 0319
Operation
16
4.5
Start-up
• Set the intensity of the pulses to the required intensity level.
• Before each treatment, make sure that the pulse counter is set to zero.
• Press the trigger button on the device (Fig. 3-1/3).
– When you press the trigger button again, the pulses will stop being emitted.
NOTE
If 2000 pulses are reached during the treatment, the handpiece stops auto-
matically. Further treatment is possible.
4.6
Treatment
Safety information
Before using the device, the user must make sure it is functioning safely and in
proper condition.
• Read
C
hapter
1 g
eneral
s
afety
i
nfOrMatiOn
before beginning treatment.
CAUTION!
If the handpiece is not positioned correctly, there is a
risk to health
due to ineffective treatment!
•
Define the treatment zone and make sure that the handpiece
position always corresponds to the treatment zone.
• Make sure that the treatment is only performed by users who
meet the conditions in
C
hapter
2.2 p
reCOnditiOns
fOr
OperatiOn
.
•
For safety reasons, using the device for applications other than those specified
in
C
hapter
is not permitted!
CAUTION!
Over extended periods, the noise of the pulses may be per-
ceived as unpleasant!
• Offer ear protection to the patient.
• Recommendation: The user should also wear ear protection.
