Intelect® Mobile Stim
SAFETy PrECAuTiONS
3
CAuTiONS
CAUTION
CAUTION
•
Read, understand, and practice the precautionary and operating
instructions. Know the limitations and hazards associated with using
any electrical stimulation device. Observe the precautionary and
operational decals placed on the unit.
•
DO NOT operate the Intelect Mobile Stim unit when connected to
any unit other than DJO devices.
•
DO NOT operate this unit in an environment where other devices
are being used that intentionally radiate electromagnetic energy
in an unshielded manner. Portable and mobile RF communications
equipment can affect Medical Electrical Equipment.
•
DO NOT use sharp objects such as a pencil point or ballpoint pen
to operate the buttons on the control panel.
•
This unit should be operated, transported, and stored in
temperatures between 15° C and 40° C (59° F and 104° F),
with relative humidity ranging from 30%-60%, and where the
atmospheric pressure is between 950 h Pa and 1050 h Pa.
•
The unit should be routinely checked before each use to determine
that all controls function normally; especially that the intensity
control properly adjusts the intensity of the electrotherapy power
output in a stable manner. Also, determine that the treatment time
control actually terminates electrotherapy power output when the
timer reaches zero.
•
The Intelect battery pack is designed for use only with Chattanooga
Intelect Mobile Stim, Combo, Laser, and Ultrasound systems.
•
Inspect cables and connectors before each use.
•
The Intelect Mobile Stim is not designed to prevent the ingress of
water or liquids. Ingress of water or liquids could cause malfunction
of internal components of the system and therefore create a risk of
injury to the patient.
•
DO NOT permit any foreign materials or liquids to enter the unit.
Take care to prevent any foreign materials including, but not limited
to, inflammables, water, and metallic objects from entering the unit.
These may cause unit damage, malfunction, electrical shock, fire, or
personal injury.
•
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to other devices in
the vicinity. However, there is no guarantee that interference will
not occur in a particular installation. Harmful interference to other
devices can be determined by turning this equipment on and off.
Try to correct the interference using one or more of the following:
reorient or relocate the receiving device, increase the separation
between the equipment, connect the equipment to an outlet on a
different circuit from that to which the other device(s) are connected
and consult the factory field service technician for help.
