28
Intelect
®
Legend Series Combo
MAINTENANCE
User Maintenance
To clean, turn unit off and unplug the power supply. Clean the unit with a damp cloth. Do not use abrasive cleaners. A small amount
of mild household detergent may be used, if desired.
Between patient uses, patient applied parts should be wiped clean with a clean damp cloth, then use another clean cloth to clean
with a hospital grade germicide. Follow germicide manufacturer directions. Some highly concentrated germicide mixtures could
damage the product if not diluted in accordance with directions of the germicide manufacturer.
Technical Maintenance
No attempt should be made to disassemble the unit. Maintenance and all repairs should be made by authorized personnel only. The
manufacturer will not be held responsible for the results of maintenance or repairs by unauthorized persons.
To fully maintain compliance with Federal Regulation Title 21 (21 CFR), this unit must be recalibrated annually. It is recommended that
all Chattanooga ultrasound products be returned to the factory or an authorized servicing dealer for repairs or recalibration. It is also
recommended after the replacement or repair of any major component.
The following items should be checked at least monthly to ensure proper operation of this unit:
1. Power cord and plug: Check to make sure the cord is not frayed, kinked or does not have torn or cut insulation.
2. Sound head cable: Check to make sure the cable is flexible, free of kinks, not frayed and the insulation is intact.
3. Sound head face: Check to see that there is no build-up of gel or foreign material on the aluminum face.
4. Lead Wires: Check that the cables are not frayed, kinked or do not have torn or cut insulation.
EU Directive on Waste Electrical and Electronic Equipment (WEEE) ensures
that product is appropriately disposed of or recycled at the end of its life.
