53
Vectra Genisys® Laser Module
TABLE OF CONTENTS
Vectra Genisys® Laser Module
MAINTENANCE
All units returned to the factory for service must include the following:
WARRANTY REPAIR/OUT OF WARRANTY REPAIR
1. Written statement containing the following information:
• Return Authorization (RA) Number- Obtain from Factory
• Unit Model Number
• Unit Serial Number
• Contact person with Phone and Fax Numbers
• Billing Address (for Out of Warranty Repair)
• Shipping Address (Where to Ship Unit after Repair)
• Detailed Description of Problem or Symptoms
2. Copy of original invoice issued at purchase of the unit.
3. Ship the unit to address specified by an authorized service technician.
Service to these units should be performed only by Service Technicians certified by Chattanooga Group. Laser requires annual calibration,
from the date placed in service, by a Service Technician certified by Chattanooga Group.
Through the purchase of a Service Manual, Chattanooga Group has made available circuit diagrams, component part lists,
descriptors, or other information which will assist authorized technical personnel to repair those parts of the equipment which are
designated by Chattanooga Group as repairable.
NOTE:
The unit was calibrated during the manufacturing process and is ready to be placed into service upon delivery.
Council Directive 2002/96/EC concerning Waste Electrical and Electronic (WEEE). Indicates a requirement
not to dispose of WEEE as municipal waste. Contact your local distributor for information regarding disposal
of the unit and accessories.
