4
Operating Controls
1. LED Screen Display - LED Parameter Display Field.
• Displays Treatment Time, Output Intensity, Frequency, Duty Cycle, Display and Head Warm.
2. Illustrated Control Panel
• Membrane switches control LED screen display and treatment parameters.
3. Intensity (Power)
• Select this prompt to set or modify output power intensity.
4. Time
• Select this prompt to set or modify treatment time in minutes.
5. Frequency
• Select this prompt to change to a frequency of 1 MHz or 3.3 MHz.
6. Duty Cycle
• Select this prompt to change to a duty cycle of 10%, 20%, 50% or Continuous.
7. Head Warm
• Select this button to warm the head of the ultrasound applicator prior to treatment.
Note:
Turning Head Warm on will be accompanied by a fan turning on and the lighting of the
Head Warm LED on the LED display. The fan and the LED will turn off when Head Warm is
turned off. A low level of output will be displayed in the output LED display when Head Warm
is active.
8. Display
• Select this button to change output display from W/cm
2
(Intensity) to Watts (Power).
9. Stop
• Select this prompt to stop a treatment session.
10. Pause
• Select this prompt to pause a treatment session.
11.
Start
• Select this prompt to begin a treatment session.
Illustrated Control Panel
LED Display
®
