Chattanooga Group INTELECT LEGEND 2C, Руководство пользователя

Страница: 20 / 30

19
INTELECT LEGEND COMBO
Frequency is the number of pulses per second of the waveform. To change the Frequency select
FREQUENCY
and press
ENTER
, then use the
UP
or
DOWN
arrows to change the frequency, from 1-120 pps.
Ramp controls the amount of time required to bring the stimulation up to the selected amplitude.
When you select
RAMP
and press
ENTER
, 4 options are displayed. They are 0.5 seconds, 1 second,
2 seconds (default) and 5 seconds.
Display provides two options of viewing output. The options are Voltage (default) and Peak
Current. The ability to assess peak current can help determine tissue response, and an
indication of impedance to current at the electrode skin interface.
Russian
The Russian current is a 2,500 Hz sinusoidal carrier wave, interrupted to create pulse trains
or "bursts." The number of bursts per second is determined by the burst frequency and the
length of the bursts is determined by the duty cycle.
Mode provides three methods of treatment including Single channel application, Reciprocal
application where stimulation alternates between agonists and antagonists and Co-Contract
where the timing of stimulation can be coordinated through two channels to simultaneously
co-contract agonist and antagonist or differing sections of a larger muscle group.
Cycle Time parameter controls the on/off cycle time of the current. There are 7 available options:
5/5, 10/10, 10/20, 4/12, 10/30, 10/50 (default) and Continuous.
The
Burst Frequency is the number of bursts per second (bps) and the available range is 20 bps to 100 bps.
Ramp
controls the amount of time required to bring the stimulation up to the selected amplitude.
When you press the Ramp button it will toggle between .5 seconds, 1 second, 2 seconds
(default) and 5 seconds.
Duty Cycle is the ratio of on time to total time of the burst and is expressed as a percentage.
The options are 10%, 20%, 30%, 40% and 50% (default).
Ramp
Mode