Chattanooga Group INTELECT LEGEND 2C, Руководство пользователя

Страница: 18 / 30

17
INTELECT LEGEND COMBO
Premodulated
Premodulated is an amplitude modulated sine wave. This waveform is similar to the
beat frequency created by Interferential current. In some cases, Premodulated therapy
provides a good alternative for Interferential treatment especially when treating areas
of the body where four electrodes can not be utilized.
Cycle Time parameter controls the on/off cycle time of the current. There are 2 available
options, Continuous (default) and 5/5.
When you highlight Beat Frequency and press the
ENTER
button, 5 options are displayed.
They are 1-10 Hz, 80-150 Hz (default), 1-150 Hz, Variable and Fixed.
The Variable option allows you to select a Low Beat frequency from 1-200 Hz and a
High Beat frequency from 1-200 Hz. To make changes in the Variable frequency,
highlight
VARIABLE
and press the
ENTER
button. To change the Beat Low frequency, use
the
DOWN
arrow to highlight Beat Low and press
ENTER
. Use the
UP
/
DOWN
arrows to adjust
the frequency. Press
ENTER
to accept.
Beat Low describes the lowest frequency in the range of a sweep mode. For example
when using a sweep of 80-150 Hz, 80 Hz is the lowest frequency.
Beat High describes the highest frequency in the range of a sweep mode. For example
when using a sweep of 80-150 Hz, 150 Hz is the highest frequency.
The Fixed Option , allows you to select a fixed frequency from 1-200 Hz. To make
changes to the Fixed frequency, highlight
FIXED
and press
ENTER
. Use the
UP
/
DOWN
arrows
to adjust frequency. Press
ENTER
to accept.
Cycle Time
Fixed Option