Fluido DHT
™
Dry Heat Therapy Unit
4
SAFETY PRECAUTIONS
Safety Precautions Continued
•
Federal law restricts this device to sale by, or on the
order of, a physician or licensed practitioner. This
device should be used only under the continued
supervision of a physician or licensed practitioner.
•
For continued protection against fire hazard, replace
fuses only with ones of the correct type and rating.
•
Make certain the unit is electrically grounded by
connecting only to a grounded electrical service
receptacle conforming to the applicable national and
local electrical codes.
•
This device should be kept away from children.
•
Care must be taken when operating this equipment
around other equipment. Potential electromagnetic or
other interference could occur to this or to the other
equipment. Try to minimize this interference by not
using other equipment in conjunction with it.
•
Before administering any treatment to a patient you
should become acquainted with the operating
procedures for each mode of treatment available, as
well as the indications, contraindications, warnings and
precautions. Consult other resources for additional
information regarding the application of Dry Heat
Therapy.
•
To prevent electrical shock, disconnect the unit from
the power source before attempting any maintenance
procedures.
•
Use only Cellex
®
processed dry heat medium in the unit
to prevent excessive dusting.
•
Adequate precautions should be taken when
treating individuals with suspected or diagnosed
medical conditions or diseases such as heart
problems, epilepsy, diabetes, etc.
•
Prior to treatment, consult a medical professional
familiar with the precautionary measures to be
taken for patients that may experience allergic
reactions to dust and pollen.
•
Properly dispose of used Cellex according to National
and local laws, rules and regulations.
WARNING
!
•
Explosion hazard if used in the presence of
flammable anesthetics. The warning symbol for
this hazard is prominently displayed on the serial
number plate.
•
Perform all Required Maintenance as described in this
and the User Manual. Strict adherence to the Required
Maintenance for the Fluido DHT units is mandatory. Failure
to perform the Required Maintenance could result in the
Cellex medium entering the heat chamber of the unit(s)
and cause severe injury to patients as well as smoke
damage to the facility and the Fluido DHT unit(s).
•
Make certain the unit is unplugged from the power source
before attempting any removal and replacement procedures
on the unit.
DANGER
Содержание FLUIDC DHT 1480
