3525 Installation Instructions
(Continued)
2
RED - 12/24 VDC POSITIVE
BLACK - 12/24 VDC NEGATIVE
YELLOW - 200 mA OUTPUT FOR ALARM
WHITE - ACTIVATION TRIGGER
BROWN - 200 mA OUTPUT FOR ALARM
+
-
VIEWED FROM BACK
KEY ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
KEY ROTATION IS CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS CLOCKWISE
FROM FRONT
1.
Assemble handle according to the proper handing
required.
2.
Rotation Limiter and Bottom Mounting bracket
determine handing.
3.
If existing cam or rod mechanism are installed on
original handle remove and install on new handle.
4.
Ensure the proper cutout in the door. (See Fig. 1)
5.
Install handle though cutout and install top & bottom
mounting brackets.
6.
Install wiring harness and route to hinge side of door
securing in place to ensure that nothing will bind or
catch.
7.
Proceed to wiring. (See Fig. 2)
Handle Mounting
RED - 12/24 VDC POSITIVE
BLACK - 12/24 VDC NEGATIVE
YELLOW - 200 mA OUTPUT FOR ALARM
WHITE - ACTIVATION TRIGGER
BROWN - 200 mA OUTPUT FOR ALARM
+
-
VIEWED FROM BACK
KEY ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
KEY ROTATION IS CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS CLOCKWISE
FROM FRONT
RED - 12/24 VDC POSITIVE
BLACK - 12/24 VDC NEGATIVE
YELLOW - 200 mA OUTPUT FOR ALARM
WHITE - ACTIVATION TRIGGER
BROWN - 200 mA OUTPUT FOR ALARM
+
-
VIEWED FROM BACK
KEY ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
KEY ROTATION IS CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS CLOCKWISE
FROM FRONT
RED - 12/24 VDC POSITIVE
BLACK - 12/24 VDC NEGATIVE
YELLOW - 200 mA OUTPUT FOR ALARM
WHITE - ACTIVATION TRIGGER
BROWN - 200 mA OUTPUT FOR ALARM
+
-
VIEWED FROM BACK
KEY ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
KEY ROTATION IS CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS CLOCKWISE
FROM FRONT
RED - 12/24 VDC POSITIVE
BLACK - 12/24 VDC NEGATIVE
YELLOW - 200 mA OUTPUT FOR ALARM
WHITE - ACTIVATION TRIGGER
BROWN - 200 mA OUTPUT FOR ALARM
+
-
VIEWED FROM BACK
KEY ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
KEY ROTATION IS CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS CLOCKWISE
FROM FRONT
Rotation Limiter
Viewed from back.
Handle rotation is counter
clockwise from front.
Bottom Mounting Bracket
Viewed from back.
Key rotation is counter
clockwise from front.
Rotation Limiter
Viewed from back.
Handle rotation is
clockwise from front.
Bottom Mounting Bracket
Viewed from back.
Key rotation is clockwise
from front.
NOTE:
* 1) Cut-out dimensions.
2) Handing is determined by rotation
limiter and bottom mounting bracket.
Fig. 1
Rotation Limiter
CAM
Top Mounting
Bracket
CAM Bolt
M3x14mm Screw
(1 place)
M3x25mm Screw
(4 places)
5.9” *
150mm
1” *
25mm
Bottom
Mounting Bracket
© 2015 RUTHERFORD CONTROLS INT’L | A DORMA GROUP COMPANY
WWW.RUTHERFORDCONTROLS.COM • PHONE: 1.800.265.6630 • FAX: 1.800.482.9795 • E-MAIL: [email protected]
3525 Installation Instructions
(Continued)
2
RED - 12/24 VDC POSITIVE
BLACK - 12/24 VDC NEGATIVE
YELLOW - 200 mA OUTPUT FOR ALARM
WHITE - ACTIVATION TRIGGER
BROWN - 200 mA OUTPUT FOR ALARM
+
-
VIEWED FROM BACK
KEY ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
KEY ROTATION IS CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS CLOCKWISE
FROM FRONT
1.
Assemble handle according to the proper handing
required.
2.
Rotation Limiter and Bottom Mounting bracket
determine handing.
3.
If existing cam or rod mechanism are installed on
original handle remove and install on new handle.
4.
Ensure the proper cutout in the door. (See Fig. 1)
5.
Install handle though cutout and install top & bottom
mounting brackets.
6.
Install wiring harness and route to hinge side of door
securing in place to ensure that nothing will bind or
catch.
7.
Proceed to wiring. (See Fig. 2)
Handle Mounting
RED - 12/24 VDC POSITIVE
BLACK - 12/24 VDC NEGATIVE
YELLOW - 200 mA OUTPUT FOR ALARM
WHITE - ACTIVATION TRIGGER
BROWN - 200 mA OUTPUT FOR ALARM
+
-
VIEWED FROM BACK
KEY ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
KEY ROTATION IS CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS CLOCKWISE
FROM FRONT
RED - 12/24 VDC POSITIVE
BLACK - 12/24 VDC NEGATIVE
YELLOW - 200 mA OUTPUT FOR ALARM
WHITE - ACTIVATION TRIGGER
BROWN - 200 mA OUTPUT FOR ALARM
+
-
VIEWED FROM BACK
KEY ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
KEY ROTATION IS CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS CLOCKWISE
FROM FRONT
RED - 12/24 VDC POSITIVE
BLACK - 12/24 VDC NEGATIVE
YELLOW - 200 mA OUTPUT FOR ALARM
WHITE - ACTIVATION TRIGGER
BROWN - 200 mA OUTPUT FOR ALARM
+
-
VIEWED FROM BACK
KEY ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
KEY ROTATION IS CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS CLOCKWISE
FROM FRONT
RED - 12/24 VDC POSITIVE
BLACK - 12/24 VDC NEGATIVE
YELLOW - 200 mA OUTPUT FOR ALARM
WHITE - ACTIVATION TRIGGER
BROWN - 200 mA OUTPUT FOR ALARM
+
-
VIEWED FROM BACK
KEY ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
KEY ROTATION IS CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS CLOCKWISE
FROM FRONT
Rotation Limiter
Viewed from back.
Handle rotation is counter
clockwise from front.
Bottom Mounting Bracket
Viewed from back.
Key rotation is counter
clockwise from front.
Rotation Limiter
Viewed from back.
Handle rotation is
clockwise from front.
Bottom Mounting Bracket
Viewed from back.
Key rotation is clockwise
from front.
NOTE:
* 1) Cut-out dimensions.
2) Handing is determined by rotation
limiter and bottom mounting bracket.
Fig. 1
Rotation Limiter
CAM
Top Mounting
Bracket
CAM Bolt
M3x14mm Screw
(1 place)
M3x25mm Screw
(4 places)
5.9” *
150mm
1” *
25mm
Bottom
Mounting Bracket
© 2015 RUTHERFORD CONTROLS INT’L | A DORMA GROUP COMPANY
WWW.RUTHERFORDCONTROLS.COM • PHONE: 1.800.265.6630 • FAX: 1.800.482.9795 • E-MAIL: [email protected]
3525 Installation Instructions
(Continued)
2
RED - 12/24 VDC POSITIVE
BLACK - 12/24 VDC NEGATIVE
YELLOW - 200 mA OUTPUT FOR ALARM
WHITE - ACTIVATION TRIGGER
BROWN - 200 mA OUTPUT FOR ALARM
+
-
VIEWED FROM BACK
KEY ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
KEY ROTATION IS CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS CLOCKWISE
FROM FRONT
1.
Assemble handle according to the proper handing
required.
2.
Rotation Limiter and Bottom Mounting bracket
determine handing.
3.
If existing cam or rod mechanism are installed on
original handle remove and install on new handle.
4.
Ensure the proper cutout in the door. (See Fig. 1)
5.
Install handle though cutout and install top & bottom
mounting brackets.
6.
Install wiring harness and route to hinge side of door
securing in place to ensure that nothing will bind or
catch.
7.
Proceed to wiring. (See Fig. 2)
Handle Mounting
RED - 12/24 VDC POSITIVE
BLACK - 12/24 VDC NEGATIVE
YELLOW - 200 mA OUTPUT FOR ALARM
WHITE - ACTIVATION TRIGGER
BROWN - 200 mA OUTPUT FOR ALARM
+
-
VIEWED FROM BACK
KEY ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
KEY ROTATION IS CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS CLOCKWISE
FROM FRONT
RED - 12/24 VDC POSITIVE
BLACK - 12/24 VDC NEGATIVE
YELLOW - 200 mA OUTPUT FOR ALARM
WHITE - ACTIVATION TRIGGER
BROWN - 200 mA OUTPUT FOR ALARM
+
-
VIEWED FROM BACK
KEY ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
KEY ROTATION IS CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS CLOCKWISE
FROM FRONT
RED - 12/24 VDC POSITIVE
BLACK - 12/24 VDC NEGATIVE
YELLOW - 200 mA OUTPUT FOR ALARM
WHITE - ACTIVATION TRIGGER
BROWN - 200 mA OUTPUT FOR ALARM
+
-
VIEWED FROM BACK
KEY ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
KEY ROTATION IS CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS CLOCKWISE
FROM FRONT
RED - 12/24 VDC POSITIVE
BLACK - 12/24 VDC NEGATIVE
YELLOW - 200 mA OUTPUT FOR ALARM
WHITE - ACTIVATION TRIGGER
BROWN - 200 mA OUTPUT FOR ALARM
+
-
VIEWED FROM BACK
KEY ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
KEY ROTATION IS CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS COUNTER CLOCKWISE
FROM FRONT
VIEWED FROM BACK
HANDLE ROTATION IS CLOCKWISE
FROM FRONT
Rotation Limiter
Viewed from back.
Handle rotation is counter
clockwise from front.
Bottom Mounting Bracket
Viewed from back.
Key rotation is counter
clockwise from front.
Rotation Limiter
Viewed from back.
Handle rotation is
clockwise from front.
Bottom Mounting Bracket
Viewed from back.
Key rotation is clockwise
from front.
NOTE:
* 1) Cut-out dimensions.
2) Handing is determined by rotation
limiter and bottom mounting bracket.
Fig. 1
Rotation Limiter
CAM
Top Mounting
Bracket
CAM Bolt
M3x14mm Screw
(1 place)
M3x25mm Screw
(4 places)
5.9” *
150mm
1” *
25mm
Bottom
Mounting Bracket
© 2015 RUTHERFORD CONTROLS INT’L | A DORMA GROUP COMPANY
WWW.RUTHERFORDCONTROLS.COM • PHONE: 1.800.265.6630 • FAX: 1.800.482.9795 • E-MAIL: [email protected]
INSTALLATION
© 2015 RUTHERFORD CONTROLS INT’L | A DORMA GROUP COMPANY
WWW.RUTHERFORDCONTROLS.COM • PHONE: 1.800.265.6630 • FAX: 1.800.482.9795 • E-MAIL: [email protected]
3525PRX
3525 Electromechanical Data Rack Handle
Lock with Proximity Reader
IS3525PRX
PCN15063
R11/15GR
Specifications
Package Contents
•
3525PRX Electromechanical Data Rack Handle Lock with
Proximity Reader
•
M3x25 Mounting Screws (qty 4)
•
M3x14 Mounting Screw (qty 1)
•
Rotation Limiter (qty 1)
•
Cam Bolt (qty 1)
•
Top Mounting Bracket (qty 1)
•
Bottom Mounting Bracket (qty 1)
•
Installation Instructions (qty 1)
Actuator Module
Supply
Voltage
12VDC to 24VDC (NOTE: Status LED will blink red if the
supply voltage is out of range.)
Standby
Current
50mA maximum at 12VDC
Operating
Current
200mA maximum at 12VDC (with no external mechanical
load applied to handle)
Stall Current
1A maximum at 12VDC (limited to 2 seconds)
Operating
Transit Time
1 second maximum (NOTE: Power must be present
during transit times. If power is removed while the lock
slide is in transit, it will complete it’s cycle when power
is restored.)
Electronic
Unlock Time
3 seconds minimum
Open
Collector
Outputs
Rated for supply voltage, maximum load
Alarm Outputs 100mA/ output maximum
Fig. 1
Data Rack Handle
Proximity Reader
Tri-Color Status LED
Lock Plug
Proximity Reader Module
Voltage
12VDC to 24VDC
Operating
Current
20mA maximum
Transmit
Frequency
125kHz
DATA Signal
Voltage
5VDC
DATA Pulse
Interval Time
40µs
DATA Signal
Delay
2ms
3525PRX
Overall
Dimensions
8-1/4” H x 1-15/32” W x 2-1/8” D
(210 x 37 x 54.3mm)
INSTALLATION
© 2015 RUTHERFORD CONTROLS INT’L | A DORMA GROUP COMPANY
WWW.RUTHERFORDCONTROLS.COM • PHONE: 1.800.265.6630 • FAX: 1.800.482.9795 • E-MAIL: [email protected]
3525PRX
3525 Electromechanical Data Rack Handle
Lock with Proximity Reader
IS3525PRX
PCN15063
R11/15GR
Specifications
Package Contents
•
3525PRX Electromechanical Data Rack Handle Lock with
Proximity Reader
•
M3x25 Mounting Screws (qty 4)
•
M3x14 Mounting Screw (qty 1)
•
Rotation Limiter (qty 1)
•
Cam Bolt (qty 1)
•
Top Mounting Bracket (qty 1)
•
Bottom Mounting Bracket (qty 1)
•
Installation Instructions (qty 1)
Actuator Module
Supply
Voltage
12VDC to 24VDC (NOTE: Status LED will blink red if the
supply voltage is out of range.)
Standby
Current
50mA maximum at 12VDC
Operating
Current
200mA maximum at 12VDC (with no external mechanical
load applied to handle)
Stall Current
1A maximum at 12VDC (limited to 2 seconds)
Operating
Transit Time
1 second maximum (NOTE: Power must be present
during transit times. If power is removed while the lock
slide is in transit, it will complete it’s cycle when power
is restored.)
Electronic
Unlock Time
3 seconds minimum
Open
Collector
Outputs
Rated for supply voltage, maximum load
Alarm Outputs 100mA/ output maximum
Fig. 1
Data Rack Handle
Proximity Reader
Tri-Color Status LED
Lock Plug
Proximity Reader Module
Voltage
12VDC to 24VDC
Operating
Current
20mA maximum
Transmit
Frequency
125kHz
DATA Signal
Voltage
5VDC
DATA Pulse
Interval Time
40µs
DATA Signal
Delay
2ms
3525PRX
Overall
Dimensions
8-1/4” H x 1-15/32” W x 2-1/8” D
(210 x 37 x 54.3mm)
INSTALLATION
© 2015 RUTHERFORD CONTROLS INT’L | A DORMA GROUP COMPANY
WWW.RUTHERFORDCONTROLS.COM • PHONE: 1.800.265.6630 • FAX: 1.800.482.9795 • E-MAIL: [email protected]
3525PRX
3525 Electromechanical Data Rack Handle
Lock with Proximity Reader
IS3525PRX
PCN15063
R11/15GR
Specifications
Package Contents
•
3525PRX Electromechanical Data Rack Handle Lock with
Proximity Reader
•
M3x25 Mounting Screws (qty 4)
•
M3x14 Mounting Screw (qty 1)
•
Rotation Limiter (qty 1)
•
Cam Bolt (qty 1)
•
Top Mounting Bracket (qty 1)
•
Bottom Mounting Bracket (qty 1)
•
Installation Instructions (qty 1)
Actuator Module
Supply
Voltage
12VDC to 24VDC (NOTE: Status LED will blink red if the
supply voltage is out of range.)
Standby
Current
50mA maximum at 12VDC
Operating
Current
200mA maximum at 12VDC (with no external mechanical
load applied to handle)
Stall Current
1A maximum at 12VDC (limited to 2 seconds)
Operating
Transit Time
1 second maximum (NOTE: Power must be present
during transit times. If power is removed while the lock
slide is in transit, it will complete it’s cycle when power
is restored.)
Electronic
Unlock Time
3 seconds minimum
Open
Collector
Outputs
Rated for supply voltage, maximum load
Alarm Outputs 100mA/ output maximum
Fig. 1
Data Rack Handle
Proximity Reader
Tri-Color Status LED
Lock Plug
Proximity Reader Module
Voltage
12VDC to 24VDC
Operating
Current
20mA maximum
Transmit
Frequency
125kHz
DATA Signal
Voltage
5VDC
DATA Pulse
Interval Time
40µs
DATA Signal
Delay
2ms
3525PRX
Overall
Dimensions
8-1/4” H x 1-15/32” W x 2-1/8” D
(210 x 37 x 54.3mm)
Package Contents:
• Electromechanical Swing Handle with Proximity Reader
• M3 x 25mm Long Mounting Screws (qty 4)
• M3 x 14mm Long Mounting Screw (qty 1)
• Rotation Limiter
• Cam Bolt
• Top Mounting Bracket
• Bottom Mounting Bracket
• Installation Instructions
• Keys
Handle Mounting:
1. Assemble handle according to the proper handing required.
2. Rotation Limiter and Bottom Mounting bracket determine handing.
3. If existing cam or rod mechanism are installed on original handle
remove and install on new handle.
4. Ensure the proper cutout in the door
(See Fig.1)
.
5. Install handle though cutout and install top & bottom mounting
brackets.
6. Install wiring harness and route to hinge side of door securing in
place to ensure that nothing will bind or catch.
7. Proceed to wiring
(See Fig.2)
.
Rotation Limiter
Viewed from back.
Handle rotation is anti-
clockwise from front.
Rotation Limiter
Viewed from back.
Handle rotation is
clockwise from front.
Bottom Mounting Bracket
Viewed from back.
Key rotation is anti-clockwise
from front
Bottom Mounting Bracket
Viewed from back.
Key rotation is clockwise from
front
Note:
Handle rotation is determined by rotating
limiter and bottom mounting bracket
Handle
Key Cylinder
Tri-Colour
LED Indicator
Proximity
Reader
Electronic Locking Swing Handle - Installation
v.160511
v.160511
1-905-884-5250
www.rfmote.com
