REAR SOLID DOOR TWO-POINT ELS1000/ELS1500 LOCK
IIS-739227, 02/18/13, Rev. 1, CPI/
800-834-4969 (USA & Canada) • www.chatsworth.com • [email protected]
For international phone numbers, see our website or contact CPI Tech Support.
This drawing contains proprietary and confidential information and is protected by U.S. and international law. Unauthorized reproduction, disclosure or use of the drawing
or the information therein is expressly forbidden except as agreed to in writing by Chatsworth Products, Inc.
Page 1 of 5
Installation Instructions
Included Hardware:
ELS1000 Master Kit:
M4X12mm screw 1 ea.
M4 Washer, 1 ea.
M10 Washer, 1 ea.
M6 X 11mm Clevis Pin, 2 ea.
6 mm E-ring Ext., 2 ea.
ELS1000 latch box contains a set of standard fasteners, please select the items
shown below from the box:
M4X10mm Flanged Screw: 1 ea. M16 Nut: 1 ea.
ELS1500 Master Kit:
M10 washer, 1 ea.
M5X16mm screw, 2 ea.
M6X35mm Hex screw, 1 ea.
M6 X 11mm Clevis Pin, 2 ea.
6 mm E-ring Ext., 2 ea.
Please select the spindle below from the ELS1500 latch box:
Tools Required:
#2 Philips screw driver.
19 mm Wrench
Rivet gun
Installation Notes:
•
The cabinet door must be disassembled in order to install or remove a
two-point latch, because the lock rods extend beyond the top and
bottom of the door.
ELS1000 Assembly Sequence
1. Install the two point ELS1000 (Fig. 1) onto rear solid door.
M10 Washer
E-ring
Front plate Border
ELS1000
ELS1000
Rear plate
ELS1000
Lock rod
M4 X 12mm
screw
Clevis pin
Cam
M16 nut
Fig. 1
ELS1000 Lock
M4 Washer
M4 X 10mm
screw
flanged
0.787” (20 mm)
