Chase Research IOLAN+, Руководство пользователя и администратора

Страница: 74 / 150

68
IO LAN +
- User and Administration Guide
** Administrator ** PORT SETUP MENU REMOTE-ADMIN
Hardware Flow ctrl Keys
Speed [9600 ] Flow ctrl [Hardware] Hot [^@] Intr [^@]
Parity [None] Input Flow [Enabled ] Quit [^@] Kill [^@]
Bit [8] Output Flow [Enabled ] Del [^@] Sess [^@]
Stop [1 ] Echo [^@]
Break [Disabled] IP Addresses
Monitor DSR [No ] Src [ ] Mask [ ]
Monitor DCD [No ] Dst [ ]
User Options Access
Name [ ] Keepalive [No ] Access [Remote ]
Terminal type [ansi ] Rlogin/Telnet [Telnet] Authentication [None ]
TERM [ ] Debug options [No ] Mode [Raw ]
Video pages [0] Map CR to CR LF [No ] Connection [None ]
CLI/Menu [Menu] Hex data [No ] Host [ ]
Reset Term [No ] Secure [No ] Remote Port [0 ]
MOTD [No ] Local Port [10006]
Figure 27: Telnet - Port Setup Menu screen.
The following fields are important:
Keys: Set all your Keys to ^@.
Access: Set this field to Remote. This sets the port of the
terminal server to listen for connections coming
from the network. There will be an INETD
process running on the terminal server that does
the listening. You can check on the status of
this process by looking at the Netstat screen of
the terminal server’s Stats menu.
Mode: Set this field to Raw.
Local Port: The INETD process running on the terminal
server for this port is listening for TCP/IP
connections on TCP port 10006 (for port 6).
The Host
If you are already familiar with ioland, all you have to do for
the above configuration on Unix is:
ioland -p <server name> 10006 <device name>