Chase Research IOLAN+, Руководство пользователя и администратора

Страница: 31 / 150

25
Terminals on Multi-user Systems
Terminals on Multi-user Systems 3
IOLAN+ is used extensively for connecting terminals,
printers and modems on multi-user Unix systems, especially
in retail. These Unix systems include SCO Unix, IBM AIX,
HP-UX, Data General’s DG/UX, etc. This section deals with
terminals and/or PCs using emulation packages (such as
Hyperterm). For information on adding printers, modems or
other devices, see the respective sections.
The Installation section covered how to attach a terminal
with access to the menu system. This is convenient for most
users. But in many applications, the users need to be ‘direct
connected’ to a specific Unix host so that they see the
login
prompt automatically. This is helpful in securing your
system, or in environments where the users need to be in
one application only.
This section will show how to setup a terminal, and other
tips such as the concept of ‘fixed ttys’, multiscreens, the
copy command, TERM features, etc. Consult Appendix C,
Cabling Guide, for information on wiring your terminal.
Remember to use the TAB key to bounce between fields, and
if you get the
Commands exit menu by mistake by hitting
, use Cancel to return to editing this menu.
3.1 Terminal Port
Configuration
This is the setup for making a terminal connect to a
designated Unix host
login prompt automatically.
The Port Setup Menu screen is shown on the next page.