17
6.1.4.2. Array
Array way image as below:
PIC6-11
“Add skip”, it can skip some PCB and not mounting this PCB.
“Create single” used to all the small PCB expand to one PCB, and save into a new work
file. This function means you can adjust one single component in this new PCB. New work
file will show “Single” at end for the name.
6.1.5. PCB calibrate
Due to each PCB is different, it has some offset when placing the second board, in
order to ensure the accuracy, you need to calibrate the actual position of the PCB and
component. Machine will auto find 2 components position of PCB, more smaller
component, higher precision.
Image as below:
