10
10.
Run
The machine needs to select a work file to run. From the main screen, click on the
“Run” button to display the following screen, where the work file can be selected.
Figure 10.1
.
Window after “Run”, showing work files.
(1)
Work file list:
The middle of the screen lists existing work files
“*.dpv”. Click to
select the work file. The single or double arrows on the right are used to select a
previous line or page;
(2)
New:
Create a new work file;
(3)
Delete:
Delete the selected work file;
(4)
Edit:
Edit the selected work file;
(5)
Load:
Load the selected work file to run;
(6)
Back:
Click left arrow button on the upper right corner of the screen to return to
the previous level window. All windows behave similarly;
10.1. Edit Work File
The work-file edit window can edit component, feeder, batch, IC tray and PCB
calibration, as chosen by the tabs.
