Charlton & Jenrick PANACHE 8040, Инструкция для пользователя, установка и обслуживание

Страница: 8 / 54

P a g e | 7
Issue No - 4(11/08/21)
PANACHE 8040 USERS INSTRUCTIONS
Note: The handset contains a sensitive temperature measurement device. To achieve the best thermostatic efficiency
do not place the handset near the heat source, avoid covering, direct sunlight or near a draft or open window etc.
Place the handset at a midpoint in the room or area being heated. Allow 5-10 minutes for the handset to stabilize if
subjected to extremes of temperature.
Auto (Thermostatic) Control
Press to awaken the handset from its dormant sleep mode at any time.
Selecting auto control
The “auto” function can only be selected once the appliances has been started and initiated
into “
manual ” mode. Once in manual mode, press and release the button to enter the
“mode” options. Auto is the first option, press to
enter auto mode.
Adjusting target temperature
Use the selection wheel to increase or decrease the temperature to the desired level, release
your finger from the wheel to transmit the target temperature (See Fig 5) to the receiver. The
“auto” function will now modulate the flame height to achieve your target temperature. The
selectable temperature range is 1 degree C to 29 degree C.
Cancelling auto function
Press to “end” and cancel the “auto” control. The handset will return to manual control.