Charles Machine Works Ditch Witch SK5BB, Руководство оператора

Страница: 13 / 27

Prepare - 12
SK5BB Operator’s Manual
Connect Attachment
Connect Attachment
Attachment
1. Position attachment on level surface with enough
space behind it to accommodate loader.
2. Ensure that lock pin handles (shown) on mount
plate are turned away from center of attachment.
3. Start engine.
4. Tilt mount plate (2) forward.
5. Position mount plate in the upper lip of the receiver
plate (1) on attachment.
6. Raise lift (loader) arms while tilting back mount
plate.
7. Turn ignition switch off and remove key.
8. Rotate lock pin handles toward center of mount
plate to secure attachment to lift plate.
IMPORTANT: Before connecting attachment to loader, ensure that mount and receiver plates are free of
dirt and debris.
IMPORTANT: Attachment should be raised
enough to clear the ground. Mount plate
should be tilted back fully.
NOTICE: To ensure proper connection, verify
that bottoms of lock pins are visible under
attachment receiver plate (shown).
t05om022c.eps
t05om026c.eps
1 2
t05om027c.eps