PR-1500-S / PR-1500-P
TECHNICALS CARACTERISTICS
July 2019
User Manual
6
/
25
This document is the property of Chargeur Plus
–
any reproduction, even partial, is strictly forbidden.
English version
1 TECHNICAL CHARACTERISTICS
1.1-General
The information, instructions and data given in this operator’s manual can be applied to all
models. If instructions concern a specific model, this will be detailed.
1.2-Intended use and limitations
The retro
excavators described in this operator’s manual are intended for loading operations
and
unloading of earth, rocks and other materials. The maximum authorized lifting capacity of the
bucket should never be exceeded.
Compliant usage also includes the following:
•
Respecting all the instructions given in this manual,
•
Carrying out all the required maintenance, at the scheduled times indicated,
•
Respecting the scheduled compulsory tests, to prevent accidents.
Forbidden usage:
Any incorrect use of the retro excavators described in this manual, that is to say any difference in
use compared to the information given in the next section of the operator's manual, is considered
as forbidden. The same applies in the case of non-compliance with the standards and instructions
given in this operator’s
manual.
Improper use can cause risks. Here are some examples of improper or abusive usage:
•
Using to lift loads without assembling the correct lifting equipment,
•
Using in a contaminated environment,
•
Using in enclosed areas without sufficient ventilation,
•
Using in extreme temperatures (hot or cold),
•
Using to work underground,
•
Using to transport people in the bucket,
•
Using to break down walls with the bucket.
External operating conditons:
Usage temperature
Minimum
-10°
Maximum
40°
Maximum humidity
90% at 40°
Maximum wind speed authorised
60 km/h
Maximum Temperature of oil in the tank
60°
* Remember to order the cooler from Chargeur Plus, in the event of hydraulic or engine problems
which could increase the temperature of the oil and could be dangerous*