8 Bay Charging Locker
User Manual
MPN: CT-300114
18.2inches (462.7mm)
8.5inches (218.0mm)
Wall-Mounting PPL8
Template for Drilling Holes
Ø 0.39inches ( 10mm)
Ø6mm
1. Screw in Feet to the bottom of the locker.
Fix 2x L racks on the top of the product by using 2x
M3 screws.
2. Mark holes on the wall with a pencil. Drill 2x
Ø6mm holes in wall according to the marks.
3. Fix 2x screw studs in holes.
4. Fix 2x M4 screws to secure the unit in place.
3. Fix 2x L racks on the
bottom of the product by
using 2x M3 screws.
4. Mark the holes on wall.
Drill 2x Ø6mm holes in
the wall according to the
marks.
Option A: Table Mount/Wall Secure
Option B: Wall Mount
2
3
4
1. Drill 4x Ø10mm holes (Suggested: 1.6m/63in
height) on wall according to the supplementary
drawing. Fix 4x screw studs and 4x screws into
the wall (not included).
2. Lift 5mm over screws for hanging the product
on the wall.
*Suggested as a
TWO-PERSON Job.
2
1
60cm
Ø6mm
4
5
6
3
5. Fix 2x screw studs in holes.
6. Fix 2x M4 screws to secure the unit in place.
P1
1
