ChargePoint Home FlexCharfePoint, Руководство по установке, Страница: 17 / 20

chargepoint.com 17
Complete the Installation
1.
Extend the cable to its full length to remove any kinks or tension.
2.
Drape the charging cable over the top
of the charging station and dock the
connector in its holster.
3.
Ensure labels specifying circuit
amperage are applied to the bottom of
the charging station and to the circuit
in the electrical panel.
4.
Restore power to the circuit at the
electrical panel.
5.
Plug the charging station into the
outlet (if applicable).
6.
Watch to ensure that the front status
light glows yellow, then blinks white.
7.
Give the Quick Start Guide, the drill bit,
the driver bit, and this Installation
Guide to the homeowner.
8.
Return all packaging materials to the
box and give the box to the homeowner.
9.
Advise the homeowner that the charging station is ready for activation
via the mobile application.
10.
Tell the homeowner the final amperage of the circuit and the expected
charging rate available after activation. (Refer to the table in the Plan the
Location section.)
Questions?
• chargepoint.com/homeinstall
• U.S. and Canada toll-free: +1-888-758-4389 (24 hours)
Important:
The Quick Start Guide contains information that the
owner needs to activate their charging station. Without activation,
the charging station charge current is limited to 16 amps.