Char-Broil 463221311, Руководство по эксплуатации продукта

Страница: 25 / 32

•
Place heat tents over tube burners by inserting tabs into slots in front of firebox. Opposite ends of heat tents rest on pins in back of
firebox.
NOTE: There is no heat tent over bar burner.
13
Heat
Tent
Back of Firebox
Pin
Heat
Tent
Front of Firebox
14
•
Place cooking grates onto grate rests.
•
Insert ends of Warming Rack pivot wire into holes in sides of gril lid. Insert ends of Warming Rack leg wire into holes in sides of
firebox.
NOTE: Pivot and leg wires, running side-to-side, should be under wires running front-to-back. If pivot and leg wires are on top,
Warming Rack is installed upside-down.
•
Unscrew ignitor cap and place AA battery into ignitor slot with positive end (+) facing outward. Screw ignitor cap onto ignitor.
Warming Rack
Leg Wire
Cooking Grate
Pivot Wire
AA Battery
+
-
+
–
Bar Burner
25