Chapman PC120, Оригинальное руководство пользователя

Страница: 12 / 16

Page 12
Initial Set-up
Fuel Tank & Gearbox
The PC120 comes with engine & gearbox oil topped up. Prior to use, make sure you remove the protective tape on
top of the fuel tank, and breather pipe. (see below)
Height
Hitch the PC120 up to the towing vehicle, adjust the height of the roller to the desired level by actuating the
height adjustment jack.
Daily Checks
Before use each day, and with the engine switched off and keys removed, the following checks should be
undertaken;
•
Brushes - With the engine switched off and keys removed, the condition of the brushes should be checked.
Any damaged or missing brushes should be replaced immediately.
•
Engine - Fluid levels should be checked daily before use and topped-up as necessary. Ensure the air intake
and screen grid are clear of debris. Ensure engine is in good order and maintained as per engine
manufacturer schedule.
•
Bearings - Ensure bearings are in good order and greased as per the maintenance schedule.
•
Belts - Ensure belts are in good order, free of debris, dirt and grease and do not have signs of damage e.g.
cracking, frayed edges, uneven wear.
•
Fuel - Ensure fuel is clean and free of dirt / debris. If necessary, check condition of fuel filter.
•
Hitch - Check condition of swivel hitch, and ensure this is attached securely to towing vehicle.
•
Tyres - Ensure tyres are free from damage and inflated to the correct working pressure for the conditions at
hand